Network Equipment

Do not throw your existing switches for PoE. Now convert your normal swotches into PoE Network, 802.3af Standard means it will run your IP Phones (any brand) and PoE Cameras. Best cost effective option with more power budget.

Cisco SRW248G4-K9-NA

• 2 x combo Gigabit SFP
• 48-port 10/100
• Alternate for Linksys SRW248G4

The T1600-G-18TS is a high performance yet cost effective L2+ managed switch. It offers powerful features such as static routing and enterprise grade QoS. All ports are Gigabit capable. Built-in security features protect you against multicast and unicast storm. It can be configured easily with web management access. Along with these cutting edge features it provides all the features that are to be expected from an industry-class network switch such as vLANs, IP-MAC port binding, port isolation, port mirroring, STP/RSTP/MSTP and IGMP snooping making it ideal choice for medium to large enterprise.

BDCOM S2500-C Series is a new-generation intelligent gigabit access switch designed for carrier's IP MAN and enterprise networks

The MikroTik RouterBOARD RB750GR3 hEX Gigabit Broadband Router is a small five port Ethernet router with big features, advance routing rules and websites blockage like youtbe or facebook etc to increase productibity of employees

Cisco 200 series switches beats the market in terms of price, performance and security. Contrary to belief that Cisco is always on expensive side. This switch will surprise you by it amazing price yet offering you most advanced network features.

The PowerConnect 5424 delivers 24 ports of wire-speed, Gigabit Ethernet with advanced security and pro features

Dinstar SBC1000 provides rich SIP-based services such as safe network access, robust security, system interworking, flexible session routing & policy management, QoS, media transcoding and media processing for small-and-medium telecommunication operators. With distributed multi-core processor, rear panel for non-blocking gigabit switching data network, embedded Linux operating system, SBC1000 delivers high capability while achieves low power dissipation. It supports 500 concurrent SIP sessions and transcodes up to 200 concurrent calls, and allows encrypted sessions via TLS and SRTP. The session border controller supports transcoding of G.729, G.723, G.711, G.726, iLBC, AMR and OPUS.

Easy-to-Use Managed Switches that Provide the Ideal Combination of Features and Affordability

P-MAC-Port-VID Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X Authentication and Radius provide you robust security strategies

• L2/L3/L4 QoS and IGMP snooping optimize voice and video application
• IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
• WEB/CLI managed modes, SNMP, RMON bring abundant management features

The Juniper Model EX3200-24T hardwired-configuration switch from Juniper Networks offer a great-speed required in busy datacenters. This one box  standalone solution for access-layer deployments in multi site offices as well as corporate networks. Featuring complete Layer 2 and Layer 3 switching capabilities.

The RG-AP810-I is a Wi-Fi 6 wireless access point that integrates dual radios, high performance, and enterprise-grade encryption technology. Due to the hybrid cloud management mode and high-density access design, it is suitable for flexible deployment in high-quality network scenarios, such as classroom, dormitory, and office scenarios in the education industry, production workshop and warehouse scenarios in the manufacturing industry, outpatient clinics and mobile ward rounds scenarios in the medical industry, boutique hotels, and retail shops.

RG-AP840-I is a high-performance Wi-Fi 6 enterprise AP designed for the majority of indoor scenarios. With the built-in IoT module, enterprise customers can be ready for future IoT expansion to boost the operational efficiency and customer experience.

Cisco Catalyst 1000 Series Switches are fixed managed Gigabit Ethernet and Fast Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco Catalyst 1000 operate on Cisco IOS Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.

Sold as pair (2 x single piece ). RG-EST350 V2 can easily transmit data from 5KM away in real time. Automatic pairing at long distance, without complex alignment.

• DH-PFS3218-16ET-135 is a 100 Mbps dual-port uplink unmanaged PoE switch. It supports functional DIP switch which provides port isolation, long distance power supply, PoE watchdog and QoS control. Featured with Gigabit uplink optical ports, it meets the need of long distance transmission

Ruijie RG-ES116G 16-Port Gigabit Unmanaged Desktop Switch. Designed to provide reliable and high-speed connectivity, this switch is the perfect solution for individuals and businesses seeking to enhance their network performance.

The Dahua PFS3226-24ET-240 24 Port PoE Switch is a high-performance intelligent PoE switch. It includes a 2-layer switch and 8.8 Gbps of switching capacity. This PoE switch provides long-distance PoE transmission, which means PoE devices up to 250 meters away. It supports a functional DIP switch, which provides port isolation, long-distance power supply, PoE watchdog, and QoS control.

Pro-6-LR is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single Pro-6-LR to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. Pro-6-LR is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. 

The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external 3G/4G modem

The GWN7665 is a powerful, enterprise-grade Wi-Fi 6E access point, ideal for small-to-medium sized businesses, multiple floor buildings, residential settings and commercial locations. It offers tri-band 2x2:2 MU-MIMO with DL/UL OFDMA technology and a sophisticated internal antenna design for stronger anti-interference, more stable connection, maximum network throughput and expanded Wi-Fi coverage range.

Huawei eKitEngine AP661 is an indoor AP in compliance with Wi-Fi 6 (802.11ax). It can simultaneously provide services on 2.4 GHz (2x2 MIMO), 5 GHz (2x2 MIMO) and 5 GHz (4x4 MIMO) frequency bands, achieving a device rate of up to 6.575 Gbps. Built-in smart antennas of the AP enable always-on Wi-Fi signals for users, significantly enhancing users wireless experiences. These strengths make it ideal for densely populated scenarios such as mobile office, education, and stadiums.

Huawei eKitEngine AP361 is an indoor Wi-Fi 6 (802.11ax) AP. It can simultaneously provide services on the 2.4 GHz (2x2) and 5 GHz (2x2) frequency bands. This AP features high bandwidth, high concurrency, and compact size, facilitating flexible deployment and saving customer investment. Such strengths make the AP a good fit for indoor coverage in SME markets, such as SOHO enterprise offices, small- and medium-sized hospitals, commercial real estate, budget chain hotels, and primary and secondary schools.

Huawei eKitEngine AP160 is a Wi-Fi 6 (802.11ax) wall plate 86x86 access point (AP) with an 8 mm ultra-thin panel. It provides services simultaneously on the 2.4 GHz (2x2 MIMO) and 5 GHz (2x2 MIMO) frequency bands, achieving a maximum device rate of 1.775 Gbps. This AP features high bandwidth, high concurrency, and compact size, facilitating flexible deployment and saving customer investment. It is ideal for indoor coverage scenarios such as enterprise workplaces, commercial real estates, and budget chain hotels.

The GWN7664E is a powerful, enterprise-grade high-performance 802.11ax Wi-Fi 6 access point, ideal for small-tomedium sized businesses, multiple floor buildings, residential settings and commercial locations. It offers dual-band 4x4:4 MU-MIMO with OFDMA technology and a sophisticated internal antenna design for stronger anti-interference, more stable connection, maximum network throughput of upto 6Gbps and expanded Wi-Fi coverage range. The GWN7664E is supported by GWN.Cloud and GWN Manager, Grandstream’s cloud and on-premise Wi-Fi management platform that makes managing your network or several networks across multiple locations easier than ever before. 

The RG-AP820-L(V2) is a Wi-Fi 6 dual-radio indoor access point (AP) launched by Ruijie Networks for indoor scenarios in the sectors covering general education, higher education, government, finance, and business.In compliance with IEEE 802.11ax, IEEE 802.11ac Wave2, IEEE 802.11ac Wave1, and IEEE 802.11n standards, the RG-AP820-L(V2) adopts a hardware-independent dual-radio design and supports optional dual-radio modes (2.4 GHz + 5 GHz or 5 GHz + 5 GHz), ensuring robust compatibility and high performance. The RG-AP820-L(V2) can deliver a combined peak data rate of 1.775 Gbps in the 2.4 GHz + 5 GHz mode or 2.402 Gbps in the 5 GHz + 5 GHz mode.

The Cisco Catalyst 3750X-48P Switch (WS-C3750X-48P-S) is a used, Layer 3 managed switch designed to provide superior performance and scalability for your network infrastructure. It offers 48 PoE+ ports, enabling robust connectivity and power delivery for various devices. Ideal for stackable networking solutions, this switch enhances operational efficiency and reliability.

The Ruijie Reyee RG-NBS3100-8GT2SFP 8-Port Cloud Managed GbE Access Switch is ideal for enterprise environments and features eight (8) Gigabit Ethernet ports and two (2) SFP uplink ports, offering high-speed connectivity and performance. The switch is distinguished by its IP camera recognition for CCTV networks and robust security policies. Additionally, its Self-Organising Network technology allows for easy cloud-based management and zero-touch provisioning, making network setup and maintenance straightforward and efficient.

The Ruijie Reyee RG-AirMetro550G-B Base Station offers exceptional wireless performance with a transmission range of up to 10 km. Designed to serve as the central hub for the RG-AirMetro Series, this base station ensures reliable connectivity for multiple point-to-multipoint (PTMP) links, supporting up to 32 remote CPEs. This makes it ideal for medium to large-scale wireless bridge networks.

N3K-C3064TQ-10GT is the Nexus 3064-T, 48 10GBase-T, and 4 QSFP+ ports. The Cisco Nexus 3064-TQ Switches are high-performance, high-density Ethernet switches that are part of the Cisco Nexus 3000 Series Switches portfolio. These compact one-rack-unit (1RU) form-factor 10 Gigabit Ethernet switches provide line-rate Layer 2 and 3 switching. They run the industry-leading Cisco NXOS Software operating system, providing customers with comprehensive features and functions that are widely deployed globally. They support both forward and reverse airflow schemes with AC and DC power inputs. The Cisco Nexus 3064 switches are well suited for data centers that require cost-effective, power-efficient, line-rate Layer 2 and 3 top-of-rack (ToR) switches.

The airFiber AF-5X 5 GHz Carrier Backhaul Radio from Ubiquiti Networks is designed for long-range, Point-to-Point (PtP) backhaul links. It features a high TDD throughput and Hybrid Division Duplexing (HDD) technology that helps the device achieve low latency. The airFiber 5X also allows users to customize backhaul links or upgrade existing PtP links. The airFiber AF-5X operates using the 5 GHz frequency band and features a range of 656,168′ / 200,000m. Included with this device is a GPS antenna mount, an external GPS antenna, a metal strap, two cable ties, a 24V/1A airFiber PoE adapter with a mounting bracket, and a power cord.

The RG-WS6008 high-performance wireless access controller (AC), developed by Ruijie Networks, is targeted for high-speed wireless networks. It can be deployed on a Layer 2 or Layer 3 network without any architecture or hardware device changes, delivering seamless and secure control over wireless networks. The RG-WS6008 can manage up to 32 wireless access points (APs) by default. With licenses for capacity expansion, it can manage a maximum of 224 generic APs or 448 wall-mounted APs.

Huawei eKit SME Network switches are designed for the SMB market. They feature flexible Ethernet networking, diversified security control, and abundant management methods, and provide higher performance and richer service processing capabilities. Widely used in economic hotels, factories, small and medium-sized education, shelter hospitals, buildings Scenarios.

TP-Link’s brand new JetStream gigabit smart switches provides a huge upgrade compared to previous versions. The switches can be managed by Omada SDN Controller, which provides professional and reliable one-step solutions. Integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and static routing provide cost-effective networking solutions for small and medium-sized businesses without sacrificing enhanced usability and strong performance. 

The AC650-256AP is a small-capacity box wireless access controller (WAC) for small office home office (SOHO) enterprises. It can manage up to 256 access points (APs) and integrates the GE Ethernet switch function, achieving integrated access for wired and wireless users.