Ubiquiti Networks WiFi 6 Pro Dual-Band celling Access Point

Description:

• Wireless Standard: Supports WiFi 6 (802.11ax), backward compatible with WiFi 5/4 and legacy 802.11a/b/g. 
• Dual-Band Operation: 2.4 GHz band (2×2 MIMO), and 5 GHz band (4×4 MIMO) for higher capacity and faster speeds.
• Throughput Rates:
• ~573.5 Mbps on 2.4 GHz
• ~4.8 Gbps on 5 GHz (when using 160 MHz channel width) 
• Aggregate Throughput: Up to about 5.3 Gbps combining both bands. 
• Client Capacity: Designed to handle 300+ concurrent clients reliably. 
• Spatial Streams: 6 spatial streams total (4 for 5 GHz, 2 for 2.4 GHz) for better data parallelism and throughput. 
• Antenna Gain: About 4 dBi gain in 2.4 GHz, ~6 dBi in 5 GHz; helps with effective coverage. 
• Physical Size & Mounting: Diameter ~197 mm, depth ~35 mm; includes both wall and ceiling mounting hardware. 
• Weight: ~460 g without mount; ~600-720 g with mount depending on version/hardware. 
• Power & PoE: Operates using PoE+, 48 V DC typical (range ~44-57 V). Power consumption ~13 W. 
• Weather Protection: Rated IP54 (limited dust ingress, splash protection), suitable for indoor environments and somewhat exposed ceiling spaces. 
• Operating Conditions: Works over a wide temperature range (-30 °C to +60 °C) and humidity 5-95% non-condensing.  
• Guest traffic isolation, VLAN support, WPA2/WPA3 etc. 
• QoS, rate limiting, etc. 
• Certifications & Compliance: Meets standards such as CE, FCC, IC. Supports relevant regional frequency bands.